Ferco 635 Door Lock

///Ferco 635 Door Lock

Ferco 635 Door Lock

55.00 inc. VAT

Out of stock

*Important* This door lock has been updated by the manufacturer and the new version can be found by clicking here: GU Ferco 635 Multipoint Door Lock 

This lock is suitable for replacing the multipoint door lock on certain timber and aluminium doors. This lock will work only in lever / lever operation. Ferco 635 multipoint locks are often found in Munster Joinery doors.

Backset: 35mm
Centers: 70mm

See pictures for dimensions.

Out of stock

Description

Ferco 635 Door Multipoint Lock

*Important* This door lock has been updated by the manufacturer and the new version can be found by clicking here: GU Ferco 635 Multipoint Door Lock 

Ferco 635 multipoint locks are often found in Munster Joinery doors. Unlike other door locks where you can simply change the lockcase (GU old, GU new, Lockmaster links) to fix the lock, with this lock this is not possible. The lockcase is permanently fixed. The Ferco 635 can be used as an alternative to the “GU Ferco” door lock, as the position of the roller locks is identical.

Identifying the Door Lock

Look along the face plate of your door lock (where the locking points are) until you locate the manufacturers name or logo. On Ferco 635 multipoint door locks you will see “Ferco 635” stamped on the face plate. This door lock has two roller locks and one latch.

Important note on Ferco 635 Door Lock Size

The overall length of the lock is 2050mm. It is this length to suit different door heights.  In most cases you will need to cut the face plate to suit the size of your door. It will usually be the top of the lock face plate that will need to be cut. The easiest way to check this is when you have the old door lock removed, hold the old lock and new lock beside each other. Mark the overall length from the old lock and cut with a hacksaw.

Cutting the faceplate to length will have absolutely no impact on the function of the lock

Manufactuer:  Ferco 635
Material:
Spindle Size: 7mm
Dimensions: (see pictures for dimensions)
Weight: 2.5kg
Suitable for: Replacing the multipoint door lock on certain timber and aluminium doors

Additional information

Weight 1 kg

Fitting Instructions

  • Remove the screws holding the door handles.
  • Remove the door handles and spindle
  • Remove the screw holding the cylinder.
  • Remove the cylinder.
  • Remove all the screws (along the face plate) holding in the door lock.
  • Remove the door lock from the door.
  • Check the overall length of the new lock against the old lock.
  • Cut if necessary with hacksaw.
  • Fit the new multipoint door lock in the door.
  • Re-fit the spindle and door handles.
  • In the open position test the operation of the lock with the door handles.
  • Re-fit the cylinder.
  • In the open position test the operation of the lock with the cylinder.
  • Re-fit the screw for holding the cylinder.
  • Re-fit the screws for holding the handles.
  • Re-fit the screws (along the faceplate) for holding in the door lock.
  • Close the door and test the operation of the door lock.

Reviews

There are no reviews yet.

Be the first to review “Ferco 635 Door Lock”

Your email address will not be published. Required fields are marked *