Fullex – Patio Sliding Door Lock – Pin On Frame

///Fullex – Patio Sliding Door Lock – Pin On Frame

Fullex – Patio Sliding Door Lock – Pin On Frame

70.00 inc. VAT

Only 2 left in stock

Fullex – Patio Sliding Door Lock – Pin On Frame

Fullex patio sliding door lock used on old aluminium patio doors.

There are two variations of this patio sliding door lock. Pin on lock (where the locking pins are positioned on the lock) and Pin on frame (where the locking pins are located on the door frame. This is the Pin on frame version

Watch our instructional video below on how to replace this door lock

See pictures for dimensions.

Backset: 28mm
Centers: 203mm

Free delivery on this product

Only 2 left in stock

SKU: DLFP-PO-Frame Categories: , Tags: , , , ,

Description

Fullex – Patio Sliding Door Lock – Pin On Frame

There are two variations of this patio sliding door lock. Pin on lock (where the locking pins are positioned on the lock) and Pin on frame (where the locking pins are located on the door frame. This is the Pin on frame version

Watch our instructional video below on how to replace this door lock

Fullex Patio Sliding Door Lock Description:

The fullex patio sliding door lock is a multipoint door lock used on old aluminium sliding patio doors. This particular lock locks against two studs in the door frame. This lock is used with the patio lever set.

There is a safety feature on this lock that prevents it from being operated incorrectly. The top stud in the frame has to make contact with the button in the top of the lock before the lever can be operated.

The centers on this lock is 203mm (distance from the centre of lever to the centre of the cylinder)

Fullex Patio Sliding Door Lock Operation

The sliding section of the door is slid closed. The two studs in the door frame connect into the lock. The small lever in the handle is pushed down, which engages the lock against the frame studs. The key in the cylinder is then turned to complete the locking process.

Additional information

Weight 1 kg

Fitting Instructions

You will need two people to lift the sliding door. Be careful as old aluminium doors can be very heavy

  1. To remove the sliding section of the patio door off the track, it must be lifted up and then out at the bottom.
  2. You will need to turn the door down on its edge, the opposite side to the lock. Put some cardboard or plywood on the ground so it doesn’t get damaged.
  3. Remove the two screws holding in the handles, and remove the handles.
  4. Using a small Allen key remove the levers.
  5. Remove the 4 screws along the edge of the door. Remove the cylinder from the lock
  6. Lift the door at one end and to old lock should slide out, use a broom handle to help it out if it gets stuck.
  7. Slide the new lock down the door section. Use a screwdriver to block the lock from travelling to far down the section.
  8. Refit the cylinder, screws, levers and handles.
  9. Test the operation of the lock, pushing in the safety button with a screwdriver.
  10. Stand the door back up and lift the door back onto the track.
  11. Close the door and test that the door is locking.

Instructional Video

Reviews

There are no reviews yet.

Be the first to review “Fullex – Patio Sliding Door Lock – Pin On Frame”

Your email address will not be published. Required fields are marked *

*

I agree

You may also like…