GU Ferco Door Lock – Multipoint Door Lock
GU Ferco door lock, often found in Munster Joinery doors. This multipoint door lock has been updated by GU which is Ferco’s parent company. The updated version has the exact same roller and deadbolt positions as the old version. It has a 35mm backset and 70mm centres. The new version features an new quick reversible latch. Simple remove the Philips head screw holding in the latch, turn the latch around and refit the screw.
There is only one major difference between the updated version and the old version. The position of the latch on the updated version is located 5mm higher compared to the old version. This shouldn’t be an issue in most doors, as the frame keep has a large strike area. The worst case scenario is re-positioning the frame keep up a small bit to suit the new latch position. See pictures for comparisons between the updated and old versions.
Identifying the door lock
Look along the face plate of your door lock (where the locking points are) until you locate the manufacturers name or logo. On GU Ferco multipoint door locks you will see “GU” stamped on the face plate. This door lock has two roller locks, one deadbolt and one latch. This multipoint door lock is commonly found on Munster Joinery doors.
Spindle Size: 7mm
Dimensions: (see pictures for dimensions)
Suitable for: Replacing the multipoint door lock on certain timber and aluminium doors
Why not take the opportunity to upgrade the security of your door, by also fitting an Anti-Snap cylinder. We recommend using the Zone 27mm key / 40mm thumb turn Anti-Snap door cylinder with this door lock, when fitted in a Munster Joinery wooden door. Please always double check the length of the cylinder in your door. If you are in any doubt please contact us through the contact form.