GU Multipoint Door Lock 2 Pin Bolt – 45mm Backset

///GU Multipoint Door Lock 2 Pin Bolt – 45mm Backset

GU Multipoint Door Lock 2 Pin Bolt – 45mm Backset

90.00 inc. VAT

In stock

GU multipoint door lock – 2 pin bolt – 45mm backset

This a very common multipoint door lock, used in modern timber (wooden) and uPVC doors. Including some nordic pine doors.

Lock operation: Lever / Lever or Lever / Pad (using a split spindle)

Backset: 45mm

Centers: 92mm

Locking points: 2 Pin bolts, 1 latch, 1 deadbolt

Free delivery on this product

See pictures for dimensions.

No screws come supplied with this product. Click here to see our selection of screws

In stock

Get it Tomorrow, Jul 24 , Order in next
SKU: DLGU2P-45 Categories: , Tags: , , , , ,

Description

GU Multipoint Door Lock – 2 Pin Bolt – Product description:

Multipoint door locks are extremely common. Found in PVC, aluminium and timber doors. GU multipoint locks are probably the most common manufacturer found in doors in Ireland.

This GU multipoint door lock features 2 pin bolts, 1 deadbolt and 1 latch. The pins act as anti-lift locks preventing the door from being lifted. The unique tapered shape of pins gives compression of the door to the draught seal, as well as the security benefits of a dead bolt.

The latch can easily be reversed to suit different door handing. Simply remove the allen screw in the centre of the latch, reverse the latch and refit the screw

This multipoint door lock can work in either lever / lever operation via a solid 8mm spindle or in lever / pad operation with an 8mm split spindle.

OPERATION OF LOCK

To lock: Push the door closed until it latches against the frame keep. Pull up the lever of the door handle to engage the multipoint locks. Turn the key in the cylinder to lock the door.

To Unlock: Turn the key in the cylinder anti-clockwise. Push down on the lever of the door handle to disengage the multipoint locks and open the door

 

Manufactuer: GU (Gretsch Unitas)
Version: Europa
Centres: 92mm
Backset: 45mm
Spindle Size: 8mm
Faceplate Width: 16mm
Dimensions: (see pictures for dimensions)
Overall Length: 2050mm – *Note* We cut the faceplate of the door lock to 2050mm to fit our postal tubes. You may have to cut the faceplate at the top of the lock with a hacksaw to suit your door. This will have no impact on the operation of the lock.

 

Identifying the door lock

Look along the face plate of your door lock (where the locking points are) until you locate the manufacturers name or logo. On GU multipoint door locks you will see “GU” stamped on the face plate. Measure from the edge of the door back to the centre of the cylinder (where the key goes in) this is called the backset. On this lock it is 45mm. Measure from the centre of the door handle lever to the centre of the top pin. On this lock it is 698mm (700mm). Measure from the centre of the door handle lever to the centre of the bottom pin. On this lock it is 790mm.

Fitting Instructions:

  1. Remove the screws holding the door handles. Remove the door handles and spindle
  2. Remove the screw holding the cylinder. Remove the cylinder
  3. Remove all the screws (along the face plate) holding in the door lock
  4. Remove the door lock from the door
  5. Fit the new multipoint door lock in the door
  6. Re-fit the spindle and door handles. In the open position test the operation of the lock with the door handles
  7. Re-fit the cylinder. In the open position test the operation of the lock with the cylinder
  8. Re-fit the screw for holding the cylinder
  9. Re-fit the screws for holding the handles
  10. Re-fit the screws (along the faceplate) for holding in the door lock
  11. Close the door and test the operation of the door lock

Reviews

There are no reviews yet.

Be the first to review “GU Multipoint Door Lock 2 Pin Bolt – 45mm Backset”

Your email address will not be published. Required fields are marked *

*

I agree

You may also like…