Hoppe London Door Handles – 92mm – 2 Screw – 113P/366M

///Hoppe London Door Handles – 92mm – 2 Screw – 113P/366M

Hoppe London Door Handles – 92mm – 2 Screw – 113P/366M

27.00 inc. VAT

Hoppe London Door Handles – 92mm – 2 Screw – 113P/366M

Hoppe London Door Handles  92mm centres – 2 Screw – Used by numerous door manufacturers down through the years. These door handles are usually used with multipoint door locks. Will suit FUHR, AGB, ASGARD, KFV, MACO, WINKHAUS, GU, LOCKMASTER & MILA door locks. Found on uPVC, aluminium and timber (wooden) doors.

More information below

Manufactuer: Hoppe
Colours Available: White, Gold & Black (Silver available as a special order)
Spindle Width: 8mm
Centres: 92mm
Material: Aluminium
Dimensions: (see pictures for dimensions)

Get it Tomorrow, May 24 , Order in next

Description

Hoppe London Door Handles  92mm – 2 Screw – 113P/366M

Hoppe London Door Handles  92mm centres – 2 Screw – Used by numerous door manufacturers down through the years. These door handles are usually used with multipoint door locks. Will suit FUHR, AGB, ASGARD, KFV, MACO, WINKHAUS, GU, LOCKMASTER & MILA door locks. Found on uPVC, aluminium and timber (wooden) doors.

On the inside of the Hoppe London door handles you will “366” or “366M” inscribed under the spindle. On some older models you will see “2026”. This will depend on how old your door handles are.

Available in following colours: White, Gold & Black (Silver available as a special order)

Each set of handles comes supplied with a 8mm spindle and 4no. fixing screws (2 sets of different lengths).

Overall Length: 205mm
Centres: 92mm
Screw Centres: 122mm
Width: 26mm

See pictures for dimensions. Aluminium construction.

This set is non-handed, meaning it can be used left or right handed. Simply rotate the handle to your required handing.

This set of door handles is unsprung (ie. No springs built in, and relies on the door lock)

Common Problems With Hoppe Door Handles

A common problem with the old version of these door handles, is the handle lever becoming loose. Giving you the impression that the handle lever will break off in your hand. On the old version, there is a plastic washer which is used as a bearing at the back of the lever. Over time this plastic washer cracks and falls into pieces, causing the lever to become loose. If left like this, the lever will eventually break off.

The new version Hoppe London door handles have steel washers instead of plastic washers (see pictures). This will prevent the handle lever from becoming loose. We stock the new version only.

Please contact us if you are unsure of what type of door handle you need or have any questions about this door handle

Additional information

Colour

Black, Gold, White

Fitting Instructions

  1. Remove the three fixing screws
  2. Remove the old door handles
  3. Depending on the thickness of your door fit the long or short spindle
  4. Fit the new handles on to the spindle. Remember: the handle with the screw holes should be fitted on the inside and the blank handle fitted on the outside
  5. Fit the screws into the handle, cut the screws to the required length if required
  6. Test the operation of the handles

Reviews

There are no reviews yet.

Be the first to review “Hoppe London Door Handles – 92mm – 2 Screw – 113P/366M”

Your email address will not be published. Required fields are marked *