Letterbox / Letterplate – 305mm x 70mm (12″ x 2 3/4″)

///Letterbox / Letterplate – 305mm x 70mm (12″ x 2 3/4″)

Letterbox / Letterplate – 305mm x 70mm (12″ x 2 3/4″)

30.00 inc. VAT

Letterbox / Letterplate – 305mm x 70mm (12″ x 2 3/4″)

Colour: Gold, Black, White, Silver
Material: Aluminium
Door Thickness: 40mm – 80mm
Dimensions: See pictures for full sizes
Letterbox / letterplate commonly used on uPVC, aluminium and timber doors. View full info below.

Description

Letterbox / Letterplate – 305mm x 70mm (12″ x 2 3/4″)

Letterbox / Letterplate 305mm x 70mm (12” x 2 3/4″)
Colours: Gold, Black & White
Aluminium letterbox / letterplate used on uPVC, aluminium and timber doors. See pictures for dimensions

Letterbox / Letterplate 305mm x 70mm (12″ x 2 3/4″) Description:

Aluminium letterbox / letter plate used on uPVC, aluminium and timber doors. Used by countless door manufacturers including Munster Joinery. The body and flaps of the letterbox are made from aluminium. The plastic sleeves sit into each other. The plastic sleeve is telescopic, to suit doors with a thickness between 40mm – 80mm. The sleeve can also be cut to smaller size with hacksaw if necessary. Spring loaded flaps keep both sides closed tightly. The foam draught seal is fitted on external side. The brush strip seal is fitted to the internal side. Comes supplied with two fixing screws.

Common Letterbox Problems

The most common problem with letterboxes is the springs breaking. Usually caused by wear and tear, but also caused rough treatment by junk mail delivery. The springs are what keep the flap closed against the seal. If the springs are broken in your letterbox, the flap will annoyingly rattle in the wind. Eventually the flap will break off completely.

Please contact us if you are unsure of the size letter box you require.

See pictures for full dimensions.

Additional information

Weight 1 kg
Colour

Black, Gold, White, Silver

Instructional Video

Find out how easy it is to install this yourself, checkout the video below.

Fitting Instructions

Fitting Instructions:
1. Remove the fixing screws holding the inside and outside sections of the letterbox
2. Using a sharp knife carefully cut the silicone seal around the letterbox
3. Pull the inside and outside sections away from the door. Remove any silicone left around the door
4. The outside section of the letter box has screw mounts set into the letterbox body. These screw mounts will not suit every door, and can be removed by tapping them out with a hammer
5. Fit the new letterbox into the door. Remember, the side with the draught seal should be fitted on the outside. The side with the brush seal should be fitted to the inside
6. Re-fit the fixing screws on the inside and outside sections
7. Optional: Apply a bead of clear silicone around the outside section of the letterbox

Reviews

There are no reviews yet.

Be the first to review “Letterbox / Letterplate – 305mm x 70mm (12″ x 2 3/4″)”

Your email address will not be published. Required fields are marked *

*

I agree