Multipoint Door Lock – Lockmaster Lockcase – Double Spindle

///Multipoint Door Lock – Lockmaster Lockcase – Double Spindle

Multipoint Door Lock – Lockmaster Lockcase – Double Spindle

55.00 inc. VAT

In stock

Lockmaster Multipoint Door Lock Lockcase

This lockcase is suitable for replacing the lockcase on Lockmaster multipoint door locks. This lock case will work either in split spindle or lever / lever operations.

This door lock is unsprung and should be used in conjunction with sprung door handles (handles with built in springs). If used with unsprung handles, the handle lever will droop down. Click on the link for the single spindle version of this lockcase.

Backset: 35mm
Centers: 92mm & 62mm

Free delivery on this product

See pictures for dimensions. See video for more information.

In stock

Get it Monday, Sep 24 , Order in next

Description

Lockmaster Multipoint Door Lock – Double Spindle

Multipoint door locks are extremely common. Found in PVC, composite and timber doors. Lockmaster multipoint locks are often found in Munster Joinery doors.

This door lock is unsprung and should be used in conjunction with sprung door handles (handles with built in springs). If used with unsprung handles, the handle lever will droop down. Click on the link for the single spindle version of this lockcase.

So what is the Door Lock lockcase?

The lockcase is the part of the lock that does all the work (like the engine in a car). It operates the multiple locking points and locks the door. 9 times out of 10 if you have a problem with your multipoint door lock, there is a problem with the lockcase. Replacing the lockcase is the quickest and easiest way of fixing a broken Lockmaster multipoint door lock.

Identifying the Door Lock

Look along the face plate of your door lock (where the locking points are) until you locate the manufacturers name or logo. On Lockmaster multipoint door locks you will see “Lockmaster” stamped on the face plate.

See the video below for information on how identify the lockcase on your Lockmaster multipoint door lock, and how to replace the lockcase.

Manufactuer:  Lockmaster
Spindle Size: 8mm
Dimensions: (see pictures for dimensions)
Weight: 0.5kg
Suitable for: Replacing the lockcase on Lockmaster multipoint door locks

 

Additional information

Weight 1 kg

Fitting Instructions

  • Remove the screws holding the door handles. Remove the door handles and spindle.
  • Remove the screw holding the cylinder. Remove the cylinder.
  • Remove all the screws (along the face plate) holding in the door lock.
  • Remove the door lock from the door.
  • There are 3 T20 torx screws holding the lockcase. Using a T20 torx bit remove these screws. Important: The
  • middle torx screw is shorter than the other two. Remember this when re-fitting. Fitting a longer screw in the middle hole will stop the lock from functioning.
  • Remove the old lockcase from the face plate.
  • Sit the face plate on to the new lockcase. Align the connecting rods. The face plate will sit completely flush when it is connected correctly.
  • Re-fit the T20 torx screws. Short screw in the middle.
  • Re-fit the multipoint door lock in the door.
  • Re-fit the spindle and door handles. In the open position test the operation of the lock with the door handles.
  • Re-fit the cylinder. In the open position test the operation of the lock with the cylinder.
  • Re-fit the screw for holding the cylinder.
  • Re-fit the screws for holding the handles.
  • Re-fit the screws (along the faceplate) for holding in the door lock.
  • Close the door and test the operation of the door lock.

 

Instructional Video

Find out how easy it is to install this yourself, checkout the video below.

Reviews

There are no reviews yet.

Be the first to review “Multipoint Door Lock – Lockmaster Lockcase – Double Spindle”

Your email address will not be published. Required fields are marked *

*

I agree

You may also like…