Multipoint Door Lock – Mila Lockcase

///Multipoint Door Lock – Mila Lockcase

Multipoint Door Lock – Mila Lockcase

65.00 inc. VAT

Out of stock

Mila Multipoint Door Lock Lockcase – 35mm Backset

This lockcase is suitable for replacing old style Mila multipoint door locks. This lock case will work only in lever / lever operations.

Backset: 35mm
Centers: 92mm

See pictures for dimensions

Free delivery on this product

Out of stock

SKU: DLMDB-35 Categories: , Tags: , , , ,


Mila multipoint door lock lockcase – 35mm Backset

Mila multipoint door locks are usually found on doors 20 + years old, and were commonly used in timber / wooden and aluminium doors.

So what is the Door Lock lockcase?

The lockcase is the part of the lock that does all the work (like the engine in a car). It operates the multiple locking points and locks the door. 9 times out of 10 if you have a problem with your multipoint door lock, there is a problem with the lockcase. Replacing the lockcase is the quickest and easiest way of fixing a broken Lockmaster multipoint door lock.

Identifying the Door Lock

Look along the face plate of your door lock (where the locking points are) until you locate the manufacturers name or logo. On this multipoint door lock you will see “Mila” stamped on the face plate between the latch and the deadbolt of the lock.

There are other versions of this lock without the deadbolt.

Manufactuer:  Mila
Spindle Size: 8mm
Dimensions: (see pictures for dimensions)
Weight: 0.5kg
Suitable for: Replacing the lockcase on old style Mila multipoint door locks


Additional information

Weight 1 kg

Fitting Instructions

  • Remove the screws holding the door handles. Remove the door handles and spindle
  • Remove the screw holding the cylinder. Remove the cylinder
  • Remove all the screws (along the face plate) holding in the door lock
  • Remove the door lock from the door
  • There are 2 philips machine screws holding the lockcase. Remove these screws
  • Remove the old lockcase from the face plate
  • Sit the face plate on to the new lockcase. Align the connecting rods. The face plate will sit completely flush when it is connected correctly.
  • Re-fit the 2 machine screws
  • Re-fit the multipoint door lock in the door
  • Re-fit the spindle and door handles. In the open position test the operation of the lock with the door handles
  • Re-fit the cylinder. In the open position test the operation of the lock with the cylinder
  • Re-fit the screw for holding the cylinder
  • Re-fit the screws for holding the handles
  • Re-fit the screws (along the faceplate) for holding in the door lock
  • Close the door and test the operation of the door lock


There are no reviews yet.

Be the first to review “Multipoint Door Lock – Mila Lockcase”

Your email address will not be published. Required fields are marked *


I agree

You may also like…