Roto Multipoint Door Handles – 92mm – 2 Screw

///Roto Multipoint Door Handles – 92mm – 2 Screw

Roto Multipoint Door Handles – 92mm – 2 Screw

33.00 inc. VAT

Roto Multipoint Door Handles  92mm – 2 Screw

Roto Multipoint Door Handles  92mm centres – 2 Screw – These door handles are usually used mainly to suit Roto multipoint door locks, but can be used with other brands of multipoint door locks. These handles are mainly found on uPVC doors.

Manufactuer: Roto
Colours Available: White & Gold (Silver available as a special order)
Spindle Width: 8mm

Centres: 92mm
Overall Length: 240mm
Screw Centres: 200mm
Width: 30mm

Material: Aluminium
Dimensions: (see pictures for dimensions)

More information below

Get it Friday, May 25 , Order in next

Description

Roto Multipoint Door Handles  92mm – 2 Screw

Roto Multipoint Door Handles  92mm centres – 2 Screw – These door handles are usually used mainly to suit Roto multipoint door locks, but can be used with other brands of multipoint door locks. These handles are mainly found on uPVC doors.

These handles are also a suitable replacement for other brands of multipoint door handles eg. Hoppe

Available in following colours: White & Gold (Silver available as a special order)

Each set of handles comes supplied with a 8mm spindle and 4no. fixing screws (2 sets of different lengths).

Overall Length: 240mm
Centres: 92mm
Screw Centres: 200mm
Width: 30mm

See pictures for dimensions. Aluminium construction.

This set is non-handed, meaning it can be used left or right handed. Simply rotate the handle to your required handing.

This set of door handles is unsprung (ie. No springs built in, and relies on the door lock)

Common Problems With Old Roto Door Handles

A common problem with the old version of these door handles, is the handle lever becoming loose. Giving you the impression that the handle lever will break off in your hand. On the old version, there is a plastic washer which is used as a bearing at the back of the lever. Over time this plastic washer cracks and falls into pieces, causing the lever to become loose. If left like this, the lever will eventually break off.

The new version Roto door handles have a steel washer that covers over the plastic washers. This will prevent the handle lever from becoming loose. We stock the new version only.

Please contact us if you are unsure of what type of door handle you need or have any questions about this door handle

Additional information

Colour

Gold, White

Fitting Instructions

  1. Remove the three fixing screws
  2. Remove the old door handles
  3. Depending on the thickness of your door fit the long or short spindle
  4. Fit the new handles on to the spindle. Remember: the handle with the screw holes should be fitted on the inside and the blank handle fitted on the outside
  5. Fit the screws into the handle, cut the screws to the required length if required
  6. Test the operation of the handles

Reviews

There are no reviews yet.

Be the first to review “Roto Multipoint Door Handles – 92mm – 2 Screw”

Your email address will not be published. Required fields are marked *