Mila Window Restrictor

///Mila Window Restrictor

Mila Window Restrictor

9.50 inc. VAT

Mila Window Restrictor

Mila window restrictor for child proofing uPVC, aluminium and timber windows. Spring loaded restrictor that automatically catches every time the window is opened. Prevents the window from opening more than a few inches, thus preventing children from accidentally opening the window and falling out.

Manufactuer: Mila
Hand: Left or Right
Restrictor Height: 9mm
Stud Plate Height: 11.5mm
Sizes: See pictures for dimensions

No screws come supplied with this product. Click here to see our selection of screws

More info below.

Description

Mila Window Restrictor

Mila window restrictor for child proofing uPVC, aluminium and timber windows. The restrictor is spring loaded, and it will automatically catch every time the window is opened. It stops the window from opening more than a few inches, thus preventing children from accidentally opening the window and falling out. This is a great solution, as it allows the window to be opened for ventilation but also takes the worry out of an opened window.

This window restrictor can be released to allow the window to be opened fully. This complies with the building regulations that state that any restriction device must be releaseable in the event of any emergency and cannot be locked with a key.

As an additional benefit, this restrictor will prevent accidental damage caused by the wind. It is very common for windows to be left open and get damaged as a result of strong winds or storms.

Mila Window Restrictor Product Description

The Mila window restrictor is a great addition to your windows. It enables the window to be partially opened for ventilation, but automatically catches and stops it from being opened to far. This is a perfect solution if you have small children, a must have for peace of mind. It will prevent a child from opening a window too far accidentally.

Mila Window Restrictor Operation

The window restrictor is spring loaded, meaning it will automatically catch every time the window is opened. The restrictor is releasable (requirement for fire safety building regulations). With one hand pull the sash towards you, with the other hand hold the restrictor to release

Additional information

Weight 1 kg
Side

Left, Right

Fitting Instructions

Fitting instructions for uPVC windows.

Check the amount of clearance you have at the bottom of your sash. Place the stud plate on the frame and close the sash. If the sash hits the stud plate, fit the restrictor on the top of the sash instead of the bottom. If the sash misses the stud plate, fit the restrictor on the bottom of the sash

  1. The stud plate should be fitted to the underside of the sash. There will be a groove that runs the whole way around the sash. It will be the exact same width as the stud plate 16mm. Fix the stud plate with two screws in this groove.
  2. Position the restrictor on the frame in relation to the stud plate. Line up the restrictor so it strikes the edge in front of the gap. Fix the restrictor to the frame with two screws.
  3. Close the sash, the restrictor should strike the stud plate and close.
  4. Open the sash, the restrictor should catch on the stud plate.

Instructional Video

Find out how easy it is to install this yourself, checkout the video below.

Reviews

There are no reviews yet.

Be the first to review “Mila Window Restrictor”

Your email address will not be published. Required fields are marked *

*

I agree

You may also like…