U Track Offset Window Espag Lock – 22mm Backset

Home/Window Parts/Window Locks/U Track Offset Window Espag Lock – 22mm Backset

U Track Offset Window Espag Lock – 22mm Backset

Out of stock

13.0018.00 inc. VAT

U Track Offset Window Espag Lock – 22mm Backset

Manufactuer:  Mila
Backset: 22mm
Lengths available: 250mm, 400mm, 600mm, 800mm, 1000mm
Width: 16mm
Roller Cam Height: 7.0mm
Screw Centres: 43mm

U Track Offset Window Espag Lock – 22mm back set

See pictures for full dimensions.

No screws come supplied with this product. Click here to see our selection of screws

Click here to watch our video on how correctly measure a window espag lock

SKU: WL-Offset- Categories: , Tags: , , , , , ,

Description

U Track Offset Window Espag Lock – 22mm Backset

Backset: 22mm
Lengths available: 250mm, 400mm, 600mm, 800mm, 1000mm
Material: Mild Steel & Zinc
Offset window espag locks, used on old uPVC windows, and modern Aluminium, alu-clad and timber windows.

U Track Offset Window Espag Lock – 22mm Backset Description

The espag is the window locking mechanism, which is operated by the window handle. Offset window espag locks are commonly found on old uPVC windows. The gear box (the section the window handle connects to) is offset to one side. This was to accommodate the uPVC window profiles that were being manufactured at the time. The available space inside the profile for a window espag lock was very small. Modern uPVC window profiles are bigger and space is not an issue as it once was. Nearly all modern uPVC windows use inline window espag locks. As a result of the switch to using inline window espag locks, offset window espag locks now are a thing of the past. Many window hardware manufacturers have stopped making offset window espag locks.

These window locks can also be used to replace other brands of offset window locks.

  • Avocet offset window espag
  • Basta offset window espag

Note: Please check sizes carefully against the sizes you require

U Track Offset Window Espag Lock – 22mm Backset Size Guide

To be absolutely sure of the size and type of window espag lock you need. We would strongly recommend removing the broken lock from the window to measure the sizes accurately. Click here to watch our video on how correctly measure a window espag lock

When replacing a window espag lock. Check the following sizes: The gearbox position (inline or offset), The overall length of the lock and the backset.

We stock the following sizes:

  • 250mm – for sash between 250mm – 429mm – 2 rollers cams
  • 400mm – for sash between 430mm – 630mm – 2 rollers cams
  • 600mm – for sash between 631mm – 830mm – 2 rollers cams
  • 800mm – for sash between 831mm – 1030mm – 2 rollers cams
  • 1000mm – for sash between 1031mm – 12300mm – 3 rollers cams

Next check the backset of the lock. Sometimes the backset size will be stamped on the gearbox of the lock. Get a measuring tape and measure from the edge of the faceplate to the centre of the handle or centre of either of the fixing screws.

There are 3 sizes available – 20mm, 22mm & 25mm. If your backset measures 20mm or 25mm use the Maco offset window espag lock

If you are replacing another brand of offset window espag lock. Measure the length of the sash (eg. if it measures 700mm select “GR.2 600-800”)

Also measure the width of the channel that the lock sits into. The width of the faceplate is 16mm

Please contact us if you are unsure of the size window lock you require.

See pictures for full dimensions. See video for more information.

Additional information

Weight 1 kg
Espag Length

1000mm, 250mm, 400mm, 600mm, 800mm

Fitting Instructions

1. Use the sizing guide above to choose the correct size window lock
2. Remove the two fixing screws holding the handle, and remove the handle
3. Remove the fixing screws on the faceplate of the lock
4. Fit the new lock into place
5. Fit the window handle back through the new lock, making sure it is closing in the same direction as before; and it is in the correct position in relation to the lock position
6. Re-fit the handle fixing screws
7. Re-fit the fixing screw to the faceplate of the lock.
8. Remove the screw/screws from the frame keeps. Move the keeps to suit the position of the roller locks. Refit the screw/screws into the frame keeps.
9. Test the operation of the lock

Reviews

There are no reviews yet.

Be the first to review “U Track Offset Window Espag Lock – 22mm Backset”

Your email address will not be published. Required fields are marked *

*

I agree

You may also like…